The Mining MinuteOne-Minute Mining Brief
Metso adds full-scale pump testing in Sala
Metso announced on September 30 that a new four-megawatt slurry-pump test rig at its Sala centre in Sweden was operational and had completed initial tests. The supplier says the facility supports full-scale performance verification across its current slurry-pump range.
Metso · Original issuer source · Source release: 2026-09-30
What happened
Metso announced on September 30 that a new four-megawatt slurry-pump test rig at its Sala centre in Sweden was operational and had completed initial tests. The supplier says the facility supports full-scale performance verification across its current slurry-pump range. [1]
Why it matters
Pumping connects ore-processing stages, and equipment selection depends on the actual operating duty. A larger test capability is therefore a technology-development story rather than proof of improved output at an individual customer mine. Supplier claims about reliability or risk reduction still need project-specific evidence. [1]
The key number
Four megawatts describes the new test rig’s stated scale. Metso also reports testing capability at flows up to 25,000 cubic metres per hour. These are facility specifications, not measured savings or production gains at a named operation. [1]
What to watch
Look for published test conditions, performance curves and customer-specific validation when judging a pump application. The useful question is whether testing represents the intended duty, not simply whether a facility is large. [1]
Sources & footnotes
- Metso — original release/feature, 2026-09-30. Checked 2026-10-24.